몽실이.'s post

#셀프인테리어 #파티션 [Installing a refrigerator partition to divide the kitchen and living room] I didn't like the side of the refrigerator in the kitchen, so I decorated it by installing a partition. The types of partition walls can be divided into glass, stripes, mesh, and perforation~ I chose a perforated iron partition. There is a reason for my choice. I'll show you the reason later~🤭 🪧 I'll explain how to purchase~ You can measure the length and width of the ceiling and floor and purchase it with reference to that size~ The size I measured was 230CM for the ceiling and floor and 80CM for the width. There are slight differences depending on the company, but it's not that different~ The company explained it in detail, so you can carefully look at that part and order it with reference to that. If the ceiling height is over 220CM, the adjustment brackets will be attached to the upper and lower parts of the partition, so you should purchase them considering that. So I ordered two 40CM ones and one 60CM one, with the length of the ceiling and the width remaining 220CM and 80CM. The two adjustable brackets were included so that they could be attached to the upper and lower parts. To prevent gaps when connecting two partition walls, the spanner needed to tighten the joint bolts and hole-finishing cap brackets was also included. I think I was able to assemble it without difficulty because you meticulously packed the necessary parts~^^ If the height is over 220CM, you need to fasten it at both the top and bottom to make it a height that can be installed. If you fasten the adjustment brackets so that the top is short and the bottom is long, you can complete the installation without difficulty~^^ Thanks to this, I was able to divide the kitchen and living room spaces, hide the parts that I don't like, and create a much more pleasant space~^^ #Iron partition #철제가벽 #냉장고가벽 #냉장고파티션 #Covering the refrigerator #공간분리 ​