Shanelog's post

Making Artisan Keycaps Even for Beginners, What Are the Results? 🤍 Hello everyone 🐰✨ Following up on my last video, I’ve brought you a review of the artisan keycap making experience I had at the Keyboard Expo 2026 SMKX. The experience took place at the Sandon Art booth. I was surprised by how many people were there, and since it was a project I’ve always really wanted to try, I decided to give it a shot. This time, I chose a fox character mold. Since the time limit was one hour, I used fast-curing UV resin. First, I mixed pigments into the clear resin to create the eyes, nose, and mouth expressions. I repeated the process of dabbing the expressions onto the mold and curing them. Once the expressions were complete, I mixed the base resin. You need to mix slowly at this stage to prevent air bubbles from forming. (I mixed too fast and ended up with bubbles 🥲) After that, I placed the resin onto the stem mold. For the base mold, I filled it starting from the hollow part, and then poured it slowly along the walls. Next, I placed the stem mold on top and pressed it down, and cured it for 3 to 4 minutes on each side. Curing After detaching it, finish with sandpaper, and it's complete 🦊💖 Since it was my first time, it took some time and some air bubbles formed, but I was surprised to see that the finished result turned out better than I expected. The fun of making it myself was greater than I thought, so I plan to try again with a different color next time 😽✨ #데스크테리어 #키캡만들기 #아티산키캡 #키보드엑스포 #샌던아트